PCB manufacturer China:What is Interfacial Stress in PCBs
As PCB manufacturer China knows that,Interfacial stress is the stress that is generated as a result of soldering two different metals together. Different metals have different CTEs (coefficient of thermal expansion) and thus expand and contract by different amounts as the temperature changes. When two different metals are soldered together, changes in temperature can cause one metal to expand more than the other. Stress caused due to this phenomenon is called Interfacial Stress. An example of this would be joining the leads of a component to a copper pad on a PCB board. The component leads can be a different material from the copper pads. The component leads are soldered onto the copper pads to form an electrical connection. An increase in temperature can cause both metals to expand by different amounts and thus interfacial stress can cause the solder joint to crack and result in a bad connection.
Another area where Interfacial Stress is found in PCBs is within the solder materials itself, due to Intermetallics. Intermetallics are compounds formed when impurities like nickel, gold, palladium and other metals get added into molten solder. These metals are usually present in the leads of surface mount components. In the soldering process, these metals mix with molten solder to form an intermetallic layer (IML). This intermetallic layer is not good because it has a different rate of thermal expansion compared to the layer over and under it. Which can cause interfacial stress failure.
Other news about S&L
- Material Considerations for Rigid-Flex PCB Design
- Rigid flex PCB:Difference between Rigid PCB and Flex PCB?
- Rigid flex PCB:Difference between Rigid PCB and Flex PCB?
- Health care PCB – HOW DOES IT IMPACT THE HEALTHCARE SYSTEM?
- WHAT IS METAL CORE PCB (MCPCB) ?
- Preparing Your Design for High Frequency PCB Layout
- FPC supplier:What Is A Touch Screen FPC?
- FPC manufacturer:What is FPC (Flexible Printed Circuit)?
- Flexible PCB supplier china:What is a PCB?
- PCB factory china Challenges—Improve Your Switched-mode Power Supply Designs
Your browsing history
- FOSTER
- Flexible PCB manufacturer tells you What is half hole printed circuit board
- Flexible PCB manufacturer tells you How are PCB substrates made
- FPC manufacturer:What is Corrosion
- How to solve the problem of chip components standing up during Multi-layer PCB SMT assembly
- PCB manufacturer China tells you the Impedance problem handling
- FPC supplier:How To Clean The FPC After Etching
- PCB manufacturer China:Key factors to consider when undertaking RF and Microwave PCB manufacturing
- FPC manufacturer:What Is TG PCB Board?
- Let us tell you the Multilayer PCB Benefits
A total of -comments【I want to comment】