Multi-layerPCB manufacturer learned that，selecting the right PCB stackup is important as it dictates reliability and performance.

Some important tips when selecting a PCB stackup include the following:

· Consider the PCB assembly – the ease of assembly will depend on the PCB stackup.

· EMC/EMI – the stackup should reduce radiation from the PCB and any interference from external forces.

· Thermal management – the PCB stackup will affect its thermal management properties.

· The cost of manufacture – different PCB stackup formations have their distinct prices.

· Mechanical limitations – the stackup design will be affected by factors such as size, shape, and weight.

· Power integrity – there should be low impedance paths for ground and power planes.

· Signal integrity – this is an integral factor when selecting a PCB stackup.Ensure there’s reduced crosstalk and signal reflections.

HighfrequencyPCB manufacture asked：How to Calculate the PCB Stackup

This is all about determining the number of layers needed for the PCB.It is also about looking at the materials used for each layer and the thickness each layer has.The steps you need to follow include the following:

1.Find the number of required layers depending on the circuit’s complexity and signal routing.

2.Find out how thick each layer should be.

3.Choose materials.

4.Arrange the layers.

5.Determine how thick the entire PCB stackup is.

6.Countercheck the PCB stackup design.