S& L

Engaging in PCB R&D and manufacturing for 18 years Leading the innovation of PCB technology

Your Location:Home» Global Presence » PCB manufacturer China:Elements to be Considered in PCB Material Selection

PCB manufacturer China:Elements to be Considered in PCB Material Selection

Article source:Editor:Sun&Lynn Mobile phone view
Sweep!
Sweep!
Popularity:521Dated :11-01-2022 03:23【big well Small

• Glass Transition Temperature (Tg)

Tg refers to the temperature at which material is converted into glass state. Standard Tg stays above 130℃ while high Tg above 170℃ and mid Tg above 150℃.

As PCB manufacturer china knows that, when it comes to material for PCBs, high Tg should be picked, which should be higher than the working temperature current runs.

• Coefficient of Thermal Expansion (CTE)

As the temperature of substance rises, substance will suffer from expansion or shrinking. When it comes to PCB fabrication, since CTEs in X, Y and thickness are different, PCB will tend to become deformed. Furthermore, plated hole may suffer from breakage or components will get damaged. Therefore, CTE of substrate material should be sufficiently low.

• Heat Resistance

PCB is required to be heat resistant. Generally speaking, PCBs should feature heat resistance of 250℃/50s, which also works on material.

• Flatness

PCB is required to feature excellent flatness. As far as SMT assembly is concerned, PCB is required to feature warpage lower than 0.0075mm/mm.

• Electrical Performance

High-frequency circuits call for PCB material with high dielectric constant and low dielectric loss. Besides, insulation resistance, dielectric strength and Arc resistance should be compatible with product requirement.

Correlation between PCB Material Selection and Product or Industry

PCB material selection plays a decisive role in contributing to product reliability and is also determined by industry particularity and requirement.

Commonly-used electronic products call for FR4 epoxy fiber glass substrate. After all, the products don’t call for special requirement on flexibility, temperature and density.

Electronic products calling for higher requirement on environmental temperature or flexibility, polyimide glass fiber substrate is applied. For high frequency, PTFE glass fiber substrate should be applied. For PCBs calling for higher requirement on thermal dissipation, metal base substrate should be used.

I want to comment:  
Content:
Verification code: