S& L

Engaging in PCB R&D and manufacturing for 18 years Leading the innovation of PCB technology

Your Location:Home» Global Presence » PCB manufacturer China:Immersion Silver Surface Finish Process

PCB manufacturer China:Immersion Silver Surface Finish Process

Article source:Editor:Sun&Lynn Mobile phone view
Sweep!
Sweep!
Popularity:691Dated :07-18-2022 02:52【big well Small

PCB manufacturer china knows that, the immersion Silver Surface Finish Process:

The immersion silver surface finish involves some steps. You will have to go through this step to coat your PCB with immersion silver:

Cleansing

The first thing you need to do is to remove oxidation and dust residues on the PCB. By doing this, you are preparing the PCB for the process. Also, wet the surface to remove air trapped in the plated-through holes.

Micro-etching

This is the next step after cleaning the PCB.  Micro-etching helps to modify the copper surface. Also, you create the liquid bath by using sulfuric acid.

Pre-dip

This stage involves immersing the PCB into acid. Pre-dip helps to prepare the copper surface for the coating process. Also, this can help to minimize the chances of oxidation.

Immersion Silver

Here, you will minimize copper metal by the silver. This will help to create a silver layer. You have to carry out this process slowly. This will help to create a consistent and uniform silver deposit layer.

Post-dip

In the stage, an antioxidant organic compound is generously applied on the board. Furthermore, this prevents oxidation.

I want to comment:  
Content:
Verification code: